MiniTool Partition Wizard is worth recommending. To perform the disk test task, you can use a professional partition manager. So, you can remove the hard drive from your PC and connect it to another PC. Tip: When you get the error “Hard Drive – Not Installed”, your Dell computer cannot boot. Next, follow the on-screen prompts and Windows starts diagnosing your PC. Then, choose Startup Repair to fix problems that prevent Windows from loading. Then, under the Troubleshoot interface, click Advanced options. In Windows 10, you can download an ISO file, create a bootable USB flash drive ( Related article: How to Create Bootable USB from ISO Windows 10 for Clean Install), boot the Dell computer from that drive, and then click Repair your computer to enter Windows Recovery Environment (WinRE). To get rid of the trouble, running a repair is necessary. Dell SupportAssist hard drive not installed is not an exception. If there is a bad Windows installation, some errors may appear and stop Windows from loading properly. If you see the start menu, choose Start Windows Normally and press Enter. Put the battery back in and plug the AC adapter into your laptop.Remove the battery from the battery compartment and press & hold the power button for 15 seconds in order to drain any residual electrical charge.Disconnect all external devices and disconnect the AC adapter.Perhaps it can restore functionality and fix Dell laptop hard drive not installed. Perform PC Hard ResetĪ hard reset is helpful to erase all the information in the memory of your computer and clear & rebuild the software connections between the hardware and BIOS. If you are using a Dell desktop, you should also check the SATA cable connection. Then, remove the hard drive and reconnect it. You need to check the hard disk connectivity physically.įor a Dell laptop, open the back case. Sometimes the issue of Dell hard drive not installed/no hard drive detected/hard drive not found/no hard drive is caused by loose or damaged hard drive cable. Besides, Legacy Option ROMs need to be enabled for Legacy boot mode. This is because Legacy boot mode is not allowed when Secure Boot is enabled. If the operating system is installed on Legacy mode, change the boot mode to Legacy. Restart the computer and see if the error is removed. Also, make sure Secure Boot is enabled and Legacy ROM is disabled. If it is set to Legacy, then change it to UEFI. Then, you can see the boot mode that your computer uses. In this case, check the boot mode and change it to the correct one.Īfter pressing F2 to enter the BIOS settings interface, go to General > Boot Sequence. If you install the OS in UEFI, but the boot mode is set to Legacy, you will encounter the error of hard drive not installed. On recent Dell laptops, UEFI boot mode is enabled by default. ![]() The Dell manufacturer offers two types of boot modes in the Windows operating system including UEFI and Legacy. If not, click each one to change.Īfter that, the second thing you should do is to check the boot mode. Under the General tab, click Date/Time.ģ.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |